office (713) 849-3366
fax (713) 849-3654
toll-free (800) SAY-AAAT
Offset J Hook
Fig.642
 |
APPLICATION: An Offset J-Hook is
recommended for supporting a non-insulated piping system
from a wall or similar adjacent member when there is a
clearance of 1”. CONSTRUCTION: An Offset J-Hook consists of a piece of carbon steel shaped to the proper configuration as shown in the diagram above. FINISHES AVAILABLE: Electro-Plated and Hot Dip Galvanized. ORDERING: Specify figure number, nominal pipe diameter, name and finish. EXAMPLE: Fig. 642, 3”, Offset J-Hook, HDG. |
