office (713) 849-3366
fax (713) 849-3654
toll-free (800) SAY-AAAT
Elongated Clevis Hanger
Fig. 609
 |
APPLICATION: An Elongated Clevis
Hanger for Insulated Lines is used to support insulated
piping and will accommodate a 2 inch thickness of
insulation on ¾ inch to 1 ½ inches piping and a 4 inch
thickness of insulation on 2 inches and larger piping.
The insulation is applied around and over the clamp itself.
An Elongated Clevis Hanger provides for elevation adjustment
of 1 1/16 inches to 3 inches depending upon the pipe size,
hanger size and insulation thickness. Temporary
support is not required for the piping while elevation
changes are being made. CONSTRUCTION: A Fig. 609 Elongated Clevis Hanger for Insulated Lines consists of a yoke and a support strap made from shaped car-bon steel plate or bar stock and a joining bolt. NOTE: Fig. 609 does not include hanger rod or nuts as shown in the picture. FINISHES AVAILABLE: Black, Hot Dip Galvanized, Electro-Plated or Painted. ORDERING: Specify figure number, nominal pipe diameter, name and finish, if other than black. EXAMPLE: Fig. 609, 8”, Elongated Clevis Hanger for Insulated |
