office (713) 849-3366
fax (713) 849-3654
toll-free (800) SAY-AAAT
Adjustable Band Hanger
Fig. 615
 |
APPLICATION: An Adjustable Band
Hanger without Swivel Nut pro-vides for vertical support of
small diameter piping systems. The elevation of the
piping system may be altered by adjusting the position of
the hex nuts on the hanger rod at the top of the hanger.
Temporary support is not required for the piping while
elevation changes are being made. CONSTRUCTION: An Adjustable Band Hanger without a swivel nut consists of a piece of carbon steel shaped to the proper configuration. NOTE: Figure 615 does not include nuts as shown in picture. FINISHES AVAILALE: Galvanized before shaped. ORDERING: Specify figure number, nominal pipe diameter and name. EXAMPLE: Fig. 615, 4”, Adjustable Band Hanger w/o Swivel Nut. |
