Clevis Hangers w/Welded Shield

Fig. 606

APPLICATION: Fig. 606 Clevis Hangers with Welded Shields are used to support insulated piping while preventing the crushing of the insulation or vapor barrier by the clevis hangers. Elevation adjust-ment is provided for as with a Standard Clevis Hanger. Temporary support is not required for the piping while elevation changes are being made.
CONSTRUCTION: A Fig. 606 Clevis Hanger with Welded Shield is a combination of the Fig. 603 Clevis Hanger and the Fig. 800 Insulation Protection Shield. The Insulation Protection Shield is rolled carbon steel plate and the Clevis Hanger consists of a yoke and a support strap made from shaped carbon steel plate or bar stock and a joining bolt.
NOTE: Fig. 606 does not include hanger rod or nuts as shown in the picture.
FINISHES AVAILABLE: Black, Hot Dip Galvanized, Electro-Plated or Painted.
ORDERING: Specify figure number, nominal pipe diameter from chart, name and finish, if other than black.

clevis hangers chart

Hardware Main