office (713) 849-3366
fax (713) 849-3654
toll-free (800) SAY-AAAT
Clevis Hanger - Light Duty
Fig. 600
 |
APPLICATION: A Light Duty Clevis Hanger provides for
small vertical loads to be supported and for elevation
adjustment of 1 1/16 inches to 2 ¼ inches depending upon
the pipe diameter/hanger size. Temporary support is not
required for the piping while elevation changes are being
made. The lower nut adjusts the piping to the proper
elevation and the upper nut, when locked into position,
pre-vents loosening due to vibration. CONSTRUCTION: A Fig. 600 Light Duty Clevis Hanger consists of a yoke and a support strap made from shaped carbon steel plate or bar stock and a joining bolt. NOTE: Fig. 600 does not include hanger rod or nuts as shown in picture. FINISHES AVAILALE: Black, Hot Dip Galvanized, Electro-Plated or Painted. ORDERING: Specify figure number, nominal pipe diameter, name and finish, if other than black. |
