PVC Coated J Hanger for Pipe or Conduit

Fig. 627

APPLICATION: A PVC Coated J-Hanger for Pipe or Conduit is recommended for the suspension of non-insulated piping systems where:
1.) electrolysis between the pipe and the hanger are of a con-cern or
2.) noise and/or vibration of the piping system is a problem.
The side closure bolt enables contractors to easily insert pipe into the hanger and make the closure.
CONSTRUCTION: A PVC Coated J-Hanger for Pipe or Conduit con-sists of a piece of carbon steel shaped to the proper configuration and a side bolt with a nut. The support strap is coated with PVC to a point just above the centerline of the pipe.
FINISHES AVAILABLE: Electro-Plated before shaped then PVC coated.
ORDERING: Specify figure number, nominal pipe diameter and name.

PVC j hanger chart

Hardware Main