Standard Clevis Hanger

Fig. 603

APPLICATION: A standard Clevis Hanger provides for sizeable loads to be supported and for an elevation adjustment of ½ inch to 3 ¾ inches depending upon the pipe diameter/hanger size. Temporary support is not required for the piping while elevation changes are being made. The lower nut adjusts the piping to the proper elevation and the upper nut, when locked into position, prevents loosening due to vibration.
CONSTRUCTION: A Fig. 603 standard Clevis Hanger consists of a yoke and a support strap made from shaped carbon steel plate or bar stock and a joining bolt.
NOTE: Fig. 603 does not include hanger rod or nuts as shown in picture.
FINISHES AVAILABLE: Black, Hot Dip Galvanized, Electro-Plated or Painted.
ORDERING: Specify figure number, nominal pipe diameter, name, and finish, if other than black.

clevis hanger chart

Hardware Main