logo 

office (713) 849-3366
fax (713) 849-3654
toll-free (800) SAY-AAAT

Intermediate 3 Bolt Alloy Pipe Clamp
Fig. 739

 

alloy pipe clamp APPLICATION:  Fig. 739 Intermediate 3 Bolt Alloy Pipe Clamps are recommended for the support of hot piping with insulation when the temperature exceeds 750°F and is less than 1050°F.
Fig. 739 Inter-mediate 3 Bolt Alloy Pipe Clamps have been designed to carry loads larger in magnitude than the Fig. 736 Standard 3 Bolt Alloy Pipe Clamp.
The 3 bolt design enables the attachment to the pipe clamp outside of the insulation.
For high temperature piping with thick insulation and a loading larger than this clamp will carry, a Fig. 742 or 745 3 Bolt Alloy Pipe Clamp may be used.
Or, if the temperature and loads dictate, Alloy Yoke Clamps, Fig. 748 or 751, may be used.
The selection of the proper 3 Bolt Pipe Clamp depends upon the temperature of the piping system and load to be carried.
The loads shown on the data chart are listed for 950°F, 1000°F and 1050°F service.
CONSTRUCTION:  Fig. 739 Intermediate 3 Bolt Alloy Pipe Clamps are made from ASTM A387-Gr. 22 steel plate or bar stock and are provided with three alloy bolts and nuts.
FINISHES AVAILABLE:  Black.
ORDERING::  Specify figure number, nominal pipe diameter, name.

alloy pipe clamp chart

 

Hardware Main

u bolt u bolt light duty u bolt heavy duty
FIG 700 FIG 703 FIG 706
pipe clamp 2 bolt standard pipe clamp 2 bolt intemidiate pipe clamp 2 bolt heavy
FIG 712 FIG 715 FIG 718
pipe clamp 2 bolt x heavy 3 bolt pipe clamp standard 3 bolt pipe clamp intermidiate
FIG 721 FIG 724 FIG 727
pipe clamp 3 bolt heavy pipe clamp 3 bolt x heavy pipe clamp alloy
FIG 730 FIG 733 FIG 736
pipe clamp alloy intermidiate alloy yoke pipe clamp alloy yoke pipe clamp HD
FIG 739 FIG 748 FIG 751
riser pipe clamp offset pipe clamp extended pipe clamp
FIG 754 FIG 763 FIG 766
riser pipe clamp
FIG 711 FIG FIG