logo 

office (713) 849-3366
fax (713) 849-3654
toll-free (800) SAY-AAAT

Standard 3 Bolt Pipe Clamp
Fig. 724

 

bolt pipe clamp APPLICATION:  Fig. 724 Standard 3 Bolt Pipe Clamps are recommended for the support of hot piping with insulation. Fig. 724 Standard 3 Bolt Pipe Clamps have been designed to carry loads that are not large in magnitude.
The 3 bolt design enables the attachment to the pipe clamp outside of the insulation. For high temperature piping with thick insulation and a loading larger than this clamp will carry, a Fig. 727, 730 or 733 3 Bolt Pipe Clamp may be used.
Or, if the temperature dictates, a Fig. 736, 739, 742 or 745 Alloy 3 Bolt Pipe Clamp may be used.
The selection of the proper 3 Bolt Pipe Clamp depends upon the temperature of the piping system and load to be carried. Alloy pipe clamps and stainless steel pipe clamps are also available.
The loads shown on the data chart are listed for 750°F and 650°F service.
CONSTRUCTION:  Fig. 724 Standard 3 Bolt Pipe Clamps are made from carbon steel plate or bar stock and are provided with three bolts and nuts.
FINISHES AVAILABLE:  Black, Hot Dip Galvanized, Electro-Plated or Painted.
ORDERING:  Specify figure number, nominal pipe diameter, name and finish, if other than black.
EXAMPLE:  Fig. 724, 6”, Standard 3 Bolt Pipe Clamp, HDG.

bolt pipe clamp chart

 

 

 

 

 

 

 

Hardware Main

u bolt u bolt light duty u bolt heavy duty
FIG 700 FIG 703 FIG 706
pipe clamp 2 bolt standard pipe clamp 2 bolt intemidiate pipe clamp 2 bolt heavy
FIG 712 FIG 715 FIG 718
pipe clamp 2 bolt x heavy 3 bolt pipe clamp standard 3 bolt pipe clamp intermidiate
FIG 721 FIG 724 FIG 727
pipe clamp 3 bolt heavy pipe clamp 3 bolt x heavy pipe clamp alloy
FIG 730 FIG 733 FIG 736
pipe clamp alloy intermidiate alloy yoke pipe clamp alloy yoke pipe clamp HD
FIG 739 FIG 748 FIG 751
riser pipe clamp offset pipe clamp extended pipe clamp
FIG 754 FIG 763 FIG 766
riser pipe clamp
FIG 711 FIG FIG