Standard U-Bolt
Fig. 700

APPLICATION: Fig. 700 U-Bolts are used to secure piping to structural members. When the piping is below the structural member, the U-Bolt provides vertical support and restricts lateral movement while allowing for axial movement.
When the piping system is above the structural member, the U-Bolt restricts lateral movement and upward movement while allowing axial movement of the piping.
Custom U-Bolts can be ordered to allow the pipe to be clamped down to a structural member tightly.
CONSTRUCTION: A Fig. 700 U-Bolt is provided with four standard hex nuts and has a longer straight threaded length than the Fig. 703 Light Duty U-Bolt.
The Standard U-Bolt is made of SA-36 carbon steel, however, for special requirements, it can be made of alloy or stainless steel, as needed.
FINISHES AVAILABLE: Black, Hot Dip Galvanized, Electro-Plated or Painted.
ORDERING: Specify figure number, nominal pipe diameter, name and finish, if other than black.

u bolt chart

Hardware Main


FIG 700	FIG 703	FIG 706

FIG 712	FIG 715	FIG 718

FIG 721	FIG 724	FIG 727

FIG 730	FIG 733	FIG 736

FIG 739	FIG 748	FIG 751

FIG 754	FIG 763	FIG 766

FIG 711	FIG	FIG

Standard U-Bolt Fig. 700

Hardware Main

Standard U-Bolt
Fig. 700