office (713) 849-3366
fax (713) 849-3654
toll-free (800) SAY-AAAT
Heavy 2 Bolt Pipe Clamp
Fig. 718
 |
APPLICATION: Fig. 718 Heavy 2 Bolt Pipe
Clamps are recommended for the support of hot or cold piping
where little or no insulation is required on the piping and
the loads to be carried are larger in magnitude than can be
safely carried by Fig. 712 Standard 2 Bolt Pipe Clamps or
Fig. 715 Intermediate 2 Bolt Pipe Clamps. For insulated low temperature piping, AAA Technology’s TRI*FOAM™ rigid urethane saddles may be used with a Fig. 718 Heavy 2 Bolt Pipe Clamp should the loads be large enough to require it rather than a Fig. 712 or a Fig. 715. For high temperature piping with thick insulation, a Fig. 724, 727, 730 or 733 3 Bolt Pipe Clamp may be used or if the temperature dictates, a Fig. 736, 739, 742 or 745 Alloy 3 Bolt Pipe Clamp may be used. The selection of the proper Double Bolt Pipe Clamp depends upon the temperature of the piping system and load to be carried. CONSTRUCTION: Fig. 718 Heavy 2 Bolt Pipe Clamps are made from carbon steel plate or bar stock and are provided with two bolts and nuts. FINISHES AVAILABLE: Black, Hot Dip Galvanized, Electro-Plated or Painted. ORDERING: Specify figure number, nominal pipe diameter, name and finish, if other than black. EXAMPLE: Fig. 718, 10”, Heavy 2 Bolt Pipe Clamp, HDG. |
Hardware Main
 |
 |
 |
| FIG 700 | FIG 703 | FIG 706 |
 |
 |
 |
| FIG 712 | FIG 715 | FIG 718 |
 |
 |
 |
| FIG 721 | FIG 724 | FIG 727 |
 |
|
 |
| FIG 730 | FIG 733 | FIG 736 |
 |
 |
 |
| FIG 739 | FIG 748 | FIG 751 |
 |
 |
 |
| FIG 754 | FIG 763 | FIG 766 |
|
|
||
| FIG 711 | FIG | FIG |