office (713) 849-3366
fax (713) 849-3654
toll-free (800) SAY-AAAT
![]() |
APPLICATION: Fig. 721 Extra Heavy
2 Bolt Pipe Clamps are recommended for the support of hot or
cold piping where little or no insulation is required on the
piping and the loads to be carried are larger in magnitude
than can be safely carried by Fig. 712 Standard 2 Bolt Pipe
Clamps, Fig. 715 Intermediate 2 Bolt Pipe Clamps or Fig. 718
Heavy 2 Bolt Pipe Clamps. For insulated low temperature piping, AAA Technology’s TRI*FOAM™ rigid urethane saddles may be used with a Fig. 728 Extra Heavy 2 Bolt Pipe Clamp should the loads be large enough to require it rather than a Fig. 712, a Fig. 715 or a Fig. 718. For high temperature piping with thick insulation, a Fig. 724, 727, 730 or 733 3 Bolt Pipe Clamp may be used. Or, if the temperature dictates, a Fig. 736, 739, 742 or 745 Alloy 3 Bolt Pipe Clamp may be used. The selection of the proper Double Bolt Pipe Clamp de-pends upon the temperature of the piping system and load to be carried. CONSTRUCTION: Fig. 721 Extra Heavy 2 Bolt Pipe Clamps are made from carbon steel plate or bar stock and are provided with two bolts and nuts. FINISHES AVAILABLE: Black, Hot Dip Galvanized, Electro-Plated or Painted. ORDERING: Specify figure number, nominal pipe diameter, name and finish, if other than black. EXAMPLE: Fig. 721, 12”, Extra Heavy 2 Bolt Pipe Clamp, HDG. |
![]() |
![]() |
![]() |
FIG 700 | FIG 703 | FIG 706 |
![]() |
![]() |
![]() |
FIG 712 | FIG 715 | FIG 718 |
![]() |
![]() |
![]() |
FIG 721 | FIG 724 | FIG 727 |
![]() |
![]() |
![]() |
FIG 730 | FIG 733 | FIG 736 |
![]() |
![]() |
![]() |
FIG 739 | FIG 748 | FIG 751 |
![]() |
![]() |
![]() |
FIG 754 | FIG 763 | FIG 766 |
![]() |
||
FIG 711 | FIG | FIG |