Fig. 545 Top Beam Hook

APPLICATION: Fig. 545 Top Beam Hooks are recommended for use on the top flange of standard wide flange beams, I-beams, tees and angle trusses.
Top Beam Hooks are not recommended where up-ward movement of the pipe may occur from surge or seismic loading.
CONSTRUCTION: A Fig. 545 Top Beam Hook consists of a bent flat bar with a hook on one end and an attachment hole for the support rod in the other end of the flat bar.
FINISHES AVAILABLE: Black, Hot Dip Galvanized or Electro-Plated.
ORDERING: Specify figure number, type, name and finish, if other than black.
EXAMPLE: Fig. 545, 4, Top Beam Hook, HDG.

beam chart

Fig. 545 Top Beam Hook

Hardware Main