Fig. 542 Top Beam Clamp

APPLICATION: Fig. 542 Top Beam Clamps are recommended for use on the top flange of standard wide flange beams, I-beams and roof trusses where the top flange thickness does not exceed .81 inches.
Custom Top Beam Clamps can be provided through special order.
CONSTRUCTION: A Fig. 542 Top Beam Clamp consists of an attachment rod, a washer, a lock washer and a standard hex nut, all made of SA-36 carbon steel.
FINISHES AVAILABLE: Black, Hot Dip Galvanized or Electro-Plated.
ORDERING: Specify figure number, nominal pipe diameter, name and finish, if other than black.
EXAMPLE: Fig. 542, 4”, Top Beam Clamp.

beam clamp chart

Fig. 542 Top Beam Clamp

Hardware Main