Angle Bracket Fig. 503

APPLICATION: Angle Brackets are used to attach hanger rod to the side of beams, columns or joists, etc. Angle Brackets are attached to a support structure by bolting.
CONSTRUCTION: Angle Brackets are cut from flat bar and bent to a right angle. Holes are punched as shown on the sketch.
FINISHES AVAILABLE: Black, Hot Dip Galvanized, Electro-Plated or Painted.
ORDERING: Specify figure number, size, name and finish, if other than black.
EXAMPLE: Fig. 503, Size 2, Angle Bracket, HDG.

angle bracket chart

Angle Bracket Fig. 503

Hardware Main