Hold Down Clamp up to 36"

CP-1010

CP-1010 Std. Reinforced Hold Down Clamp
Availability - 10" NPS to 36" NPS
Application -
⦁ To control piping vibration primarily perpendicular to the pipe axis.
⦁ To provide both vertical and lateral dynamic restraint while allowing for axial thermal expansion and contraction. Bolt torque and clamp stiffness define the Resistance.
⦁ Restraint loads can be adjusted by tightening down on the anchor bolts.
CP-1010 & CP-1011 Hold Down Clamps have a 1/2” tightening gap and have a minimal gap between the pipe & the bearing

 

 

 

 

 

 

Download Dynamic Restraints Brochure  Click Here